Categories
vinyl-flooring-installation-in-brisbane vinyl-flooring-installation-in-logan vinyl-flooring-installation-in-mount-gravatt

Laminate Flooring Vs. Vinyl Flooring Installation In Brisbane

Many of the benefits of the vinyl flooring installation in Brisbane and laminate flooring are the same. Both provide longevity, have an attractive appearance, and the installation cost is not that high. From afar, both types of flooring appear to be the same. In every category, neither type of flooring is superior to the other. Vinyl floors are ideal for high-moisture regions and simple to maintain.

On the other hand, Laminate flooring provides a greater range of stylistic options and a better resale value. If you are unsure which flooring would be the best choice for you, then this post is for you. In this blog, we are going to tell you about the differences between both types of flooring.

What Are The Key Differences Between Laminate Flooring And Vinyl Flooring?

Vinyl Flooring

Vinyl flooring may appear to be a solid, uniform surface, but it is actually product with layers, similar to laminate flooring. It has at least four layers. A transparent wear layer sits on top, with a high-definition photographic layer beneath it. The majority of the flooring comprises a thick core layer, with a soft foam layer at the bottom.

Laminate Flooring

Four or five layers of materials make up laminate flooring. A transparent wear layer sits on top, protecting the underlying image layer, which is a photographic picture of wood or stone. The third layer is a thin, impact-resistant layer, which is followed by the product’s main component: high-density fibreboard, or HDF. Soft foam or, in certain laminates, a backer paper layer is the final and lowest layer.

Key Differences Are As Follows:

  • Vinyl flooring is made of 100% polymer, but laminate floors are made of high-density fibreboard made from wood.
  • Laminate flooring is water-resistant, while vinyl is completely waterproof.
  • The core product of vinyl is plastic, but the laminate floor is a by-product of wood

Which One Provides A Better Appearance?

Under the hard, transparent wear layer of higher-quality vinyl plank and tile flooring, there is an image or picture layer. Typically, this picture depicts a wood species such as oak, maple, or hickory or, less frequently, a stone. However, not every vinyl flooring installation in Logan has this lifelike appearance. Sheet and tile vinyl flooring that is older and less expensive is manufactured using a rotogravure method. It is similar to a cylindrical printing machine, and has a top coat of transparent wear layer.

To provide the appearance of genuine wood or stone, all laminate floorings have a high-definition photographic layer beneath the translucent wear layer. The look of laminate flooring is its distinguishing attribute. Laminate flooring comes in nearly every colour, species, and style of natural wood and stone flooring, including hand-scraped, rustic, reclaimed wood, multi-tonal, natural finish, whitewashed, multi-length, and more.

Therefore, when it comes to appearance, you can rely on laminate flooring.

Which one Is Easier And More Convenient To Maintain?

It is preferable to start cleaning vinyl flooring and laminate flooring using dry methods like a vacuum, brush, broom, or dust mop. A moist mop with a neutral detergent is generally all that is necessary to remove entrenched grime.

Wet mopping is where vinyl flooring and laminate flooring differ. It is sometimes the simplest approach to cleaning a floor that is very unclean. Wet mopping is possible with vinyl flooring. However, it is not possible with laminate flooring.

Which One Provides Better Resistance From Water And Heat?

From top to bottom and on all edges, vinyl flooring is completely waterproof. When vinyl flooring is damp, it eventfully dries without losing its proportions or look. Heat may harm the material. However, the heat criteria that most vinyl floorings fulfil are frequently far greater (158 degrees Fahrenheit) than what may be expected in everyday use.

When it comes to water, laminate flooring is especially vulnerable due to its wood-based core. Allowing water to gather on the surface—near exposed seams or edges—can allow it to seep beneath the surface and into the core. The water will be absorbed by the core. The core will not return to its previous proportions after drying.

Heat has little effect on the high-density fibreboard core of laminate flooring. Under excessive heat, however, other layers, such as the top wear layer, may melt. These temperatures, like those of vinyl flooring, are significantly higher than those observed in most homes.

In Conclusion

Vinyl flooring installation in Mount Gravatt and laminate installation is interchangeable in a home. As vinyl is better for moist areas, we recommend you to use it for the bathroom. For the rest of the house, it is better if you go with laminate flooring.

We can help you in installing new floors in your home or office. Visit our website for more information.

Categories
vinyl-flooring-installation-in-brisbane vinyl-flooring-installation-in-calamvale vinyl-flooring-installation-in-mount-gravatt

A Few Drawbacks Of The Vinyl Flooring Installation in Brisbane

As a hardwood floor contractor, you may discover that the cost of hardwood floors puts off some homeowners. Instead, they are persuaded to go with vinyl flooring installation in Brisbane, which closely mimics the wood floor. On the other hand, homeowners must be fully educated on the hazards and drawbacks of vinyl flooring. 

As technologies for recreating the look of wood floors in vinyl get more sophisticated, more homeowners will be enticed to choose vinyl over genuine hardwood floors. The appearance of vinyl is achieved primarily by creating a photographic image layer between the backing and the transparent wear layer. 

Luxury vinyl flooring may appear to be identical to natural hardwood floors, but the truth is that they are not. Though vinyl planks may be enticing to their low cost, especially when compared to hardwood flooring, they may have a negative impact on a homeowner’s budget and maybe their health in the long run. 

The Drawbacks Of Vinyl Flooring

Yes, vinyl flooring is affordable and appear to be made of natural wood, but it can cost a homeowner considerably more in the long term.

The Following Are Some Of The Drawbacks Of Vinyl Flooring- 

  • Repairs are not possible
  • Vinyl flooring installation in Calamvale has the potential to release volatile organic chemicals (VOCs)
  • Wood floors have a shorter lifespan
  • There is no positive or negative effect on the resale value of a house. 
  • Challenging to get rid of, primarily if glue was utilised after installation. 
  • Not environmentally friendly, difficult to recycle. 

With such a long list of drawbacks, any homeowner who considers the big picture would certainly reject vinyl flooring. But what should they replace it with? 

A High-quality Substitute For Vinyl Flooring

What should a homeowner do? Given the low cost of the vinyl flooring installation in Mount Gravatt and the understanding of its drawbacks, it may be difficult for people to choose an alternative to vinyl floors. As a hardwood floor contractor, though, you have a no-brainer choice to give customers.

If the homeowner seeks a low-maintenance, easy-to-install, and long-lasting flooring option, prefinished engineered hardwood flooring is a good choice.

Depending on labour expenses, prefinished hardwood flooring can be more expensive per square foot than solid hardwood flooring. Still, it provides many features like vinyl flooring that homeowners seek, such as stability and longevity. Prefinished engineered hardwood flooring has a 1 mm to 4 mm thick wear layer of wood on top of a substantial inner core of plywood, birch, or pine, which contributes to the boards’ stability.

Prefinished, engineered hardwood flooring is somewhat more expensive than vinyl flooring, but it has the following advantages:

  • Increases the resale value of the home 
  • Available in environmentally friendly variants
  • Installation time is reduced since prefinished flooring is already sanded and finished.
  • There is no need for drying or curing time.
  • There were no significant scents or dust from sanding during the installation.

Compared to vinyl flooring, prefinished engineered hardwood floors provide more benefits and are better suited to big-picture thinkers. With some information and direction, you can divert homeowners away from vinyl flooring and toward a far better option!

Categories
vinyl-flooring-installation-in-mount-gravatt

Vinyl Flooring Installation – DIY or Choose A Professional?

Deciding to change your floors is simple, but determining which type of flooring is best for your house may be more difficult. However, if you choose vinyl flooring installation in Mount Gravatt, you may be confident that you have made a wise decision. Vinyl is highly durable, ideal for busy households with many foot activities. It’s also simple to clean and maintain. Furthermore, its resilience to water makes it a perfect choice for almost every area in the house, including kitchens, bathrooms, and laundry rooms. It is delightful to walk on and not become extremely cold in the winters. 

One of the most significant advantages of vinyl flooring is its low cost. Vinyl is far less expensive than luxury flooring options, so you will save a lot of money by using it in your house. If you want to save more money, try installing your new vinyl flooring yourself rather than paying a professional. Not sure if you are up for the challenge? Here’s all you need to know to decide if professional or do-it-yourself installation is best for you. 

You should employ a professional or do-it-yourself?

  • Measure The Space- If you intend to install vinyl flooring on your own, make sure you carefully measure your room. Multiply the length by the width in the feet to get the total floor space. If the room is not entirely rectangular, you may need to divide it into portions. Determine how many vinyl tiles or planks you require based on the overall square footage. Some homeowners like to purchase a little more to account for possible mishaps along the route. Having additional tiles or planks on hand will give you some leeway if you need to make cuts. 
  • Do You Know What Tools To Use? – Unlike some other varieties of flooring, vinyl does not need the use of several specialised tools. Most of the tools you will need are either already in your garage or are reasonably priced at your local improvement store. The following are the necessary tools for installing vinyl flooring on your own-
  1. Knife for general use (preferably with an angled blade)
  2. Affixing (except when using glue-less or peel-and-stick vinyl products)
  3. Roller for the floor ( consider renting one to save money)
  • Do You Know What Type Of Underlayment To Use? – Underlayment is not required for all types of vinyl flooring; in fact, most vinyl floors are designed to be installed directly on the subfloor as long as it is level. The manufacturer’s instructions will tell you if you need a particular sort of underlayment. Follow the instructions carefully since failure to do so may void your warranty. If you require underlayment for your vinyl flooring, make sure it’s designed for use with vinyl. When you want to raise the height of your floor or add a bit of extra cushion to your flooring for comfort, an underlayment might be helpful. On the other hand, underlayment should only be considered when dealing with vinyl that is at least 4 millimetres thick. Certain varieties of vinyl flooring, including some wood plastic composite (WPC) vinyl plank flooring, include a connected underlayment. This additional layer, which is often constructed of cork, will aid in cushioning and sound attenuation.